Click image to view full size image
Description
It has light weight, low cost, the modelling unique, easy installation, heat dissipation, good permeability, etc. It is suitable for laying large diameter cables in general, especially for laying high and low voltage power cables.
Cable ladder forming machine with cover, need to match when ordering can indicate when shield, all its parts and tray type, slot type bridge.
The surface treatment of stepped cable bridge can be divided into three types: electrostatic spray, galvanizing and spray painting.
Main Specification
NO. |
Item |
Unit |
Main Specification |
1 |
Material Thickness |
mm |
1.0-2.0 |
2 |
Forming Speed |
m/min |
8-15 |
3 |
Roll Station |
/ |
27 stations (depend on the profile) |
4 |
Main Power |
kw |
7.5 |
5 |
Hydraulic Power |
kw |
3 |
6 |
Comtrol System |
/ |
PLC Panasonic/Mitsubishi/Anchuan |
7 |
Drive |
/ |
by chain |
8 |
Material of Roller |
/ |
Cr12 quenching treatment:HRC58-62° |
9 |
Material of Shaft |
/ |
45﹟steel/40CR |
10 |
Length Tolerance |
mm |
≤±1.5mm |
11 |
Coil Diameter |
mm |
φ508/610 |
12 |
Hydraulic Pressure |
Mpa |
10Mpa |
Flow Chart
Drawing Chart
http://www.steelrolltech.com/